Are you ready for some intense training on the most powerful parts of G-ZERO?
Hours: Classes are from 8:00am to 12, 12:45 to 4:45pm (Lunch
is on your own from 12:00 noon to 12:45 pm)
Fee: $200 per day, $100 per half-day
Location: 11930 Main St., Suite B, Sunol, CA 94586 (above Bosco's Restaurant)
![[ Yahoo! Maps ]](http://us.i1.yimg.com/us.yimg.com/i/us/mp/gr/mplogo.gif){kind=small}
Map
of 11930 Main St, Suite B
Sunol, CA 94586-9502
Directions
to 11930 Main St
Sunol, CA 94586-9502
 |
To reserve your seat(s), fill out a Registration Form and fax (or mail) back to us:
Rapid Output, 1220 Kilkare Road, Sunol, CA 94586. Phone: 888-656-1945
Fax: 925-264-4495 We will confirm registration by phone or fax or email. |
Cancellations and substitutions: To guarantee a class seat, payment must be received 3 working days before class begins. Cancellations received up to five working days before the training will receive 100% credit toward another future class. Cancellations received up to 24 hours before the training will receive 50% credit toward another future class. “No shows” receive 10% credit toward another future class. If you cannot pre-pay, then please have a PO# ready and give us a call one day before the class to find out if a seat will be available. Student substitutions may be made at any time, as long as prerequisites are still met.
Date: Saturday, January 20, 2007
Introduction to G-ZERO Mill
Prerequisite: must have programmed first part in the G-ZERO Mill
Tutorial manual
Morning session covers basic Windows usage plus G-ZERO drilling with DRILL command: G81, G82, G83, G84.
Afternoon session covers basic milling: MILL, RECTANGLE, ROUND and introduction to COMP.
Date: Saturday, January 27, 2007
Intermediate G-ZERO Mill (Plus Introduction to Version 5)
Prerequisite: must have programmed first 3 parts in the G-ZERO
Mill Tutorial manual
Morning session covers G-ZERO milling topics: COMP, ROUGH, ROTATE along with mill entry techniques.
Afternoon session covers new version 5 topics: Automatic lead-on/lead-off, Undo/Redo, Menu Widgets introduction, Fixtures(Clamp, Bolt, Vise), Corner rounding tools. Priority support customers should bring their computers, if possible, so we can load the new version.
Date: Saturday, February 3, 2007
Advanced G-ZERO Mill (Plus Version 5)
Prerequisite: must have programmed first 6 parts in the G-ZERO
Mill Tutorial manual
Morning session covers advanced programming with COMP, along with extra axis options: WRAP, STATION, 3D BUILDING BLOCKS, plus if there is interest: 4-AXIS VIEW, 5 AND 6-AXIS VIEW.
Afternoon session covers new version 5 topics: Automatic lead-on/lead-off, Optimized drill path, Better helixing, Undo/Redo, Menu Widgets introduction, Fixtures(Clamp, Bolt, Vise), Corner rounding tools, adding new tool types, plus if there is interest: Widget creation and maintenance, Station w/ Child, Customizable axis direction and orientation, %NOSUB. Priority support customers should bring their computers, if possible, so we can load the new version.
Date: Saturday, February 10, 2007
Version 4 Intermediate + Advanced G-ZERO Lathe
Prerequisite: must have programmed at least 2 complete parts
(sample or real) using G-ZERO
Covers training material included
in your manual: Face, Rough, Tapered Thread,
Groove, SuperRough, Rotate, CAD Converter, SuperGroove, and more. Live tooling will also be covered if there is
interest.
 |
Next Training...
|