MAT'L od3.25 id0 zlim-3 zface.02 zclamp.4 type4=ALUMINUM_ 3.10  TOOL 1 in/out2 *** ROUGH OD_ 3.10 $ TYPE 1 mat1=TIN tnr.032 size.5_ 3.10  ROUGH xstk.02 zstk.003 depth.2 x3.3 z.05 safang270 f3_ 3.10 COMP ang90 lft/rt2 f6_ 3.10 POINT x.5 z0_ 3.10 LINE angle90_ 3.10 RADIUS .0625 type2 x1.25 z0 (xc1.125 zc-.0625)_ 3.10 LINE angle180_ 3.10 RADIUS -.0625 type2 x1.25 z-.5 (xc1.375 zc-.4375)_ 3.10 LINE angle90_ 3.10 RADIUS .0625 type2 x1.625 z-.5 (xc1.5 zc-.5625)_ 3.10 LINE angle180_ 3.10 POINT x1.625 z-1.875_ 3.10 LINE angle90_ 3.10 POINT x2.25 z-1.875_ 3.10 LINE angle180_ 3.10 POINT x2.25 z-2.5625_ 3.10 LINE angle90_ 3.10 POINT x3.2425 z-2.5625_ 3.10 LINE angle180_ 3.10 POINT x3.2425 z-2.9_ 3.10 UNCOMP angle180_ 3.10  unROUGH _ 3.10  TOOL 2 in/out2 *** FACE AND FINISH OD_ 3.10 $ TYPE 1 mat1=TIN tnr.015 size.5_ 3.10 FACE x1.35 z.025 xcut-.03 zcut0 depth0 f6_ 3.10 REPEAT from5 thru23_ 3.10  TOOL 3 in/out1 *** 37/64 DRILL FOR 5/8-18 TAP_ 3.10 $ TYPE 29 mat0=M2 tnr0 size.578125_ 3.10  DRILL g74 rap.1 cut-1.25 peck-2 tip1 ret.1 f.0066_ 3.10  TOOL 4 in/out1 *** COUNTERSINK_ 3.10 !$ TYPE 29 mat0=M2 tnr0 size.64_ 3.10 " DRILL g74 rap.05 cut0 peck1 tip90 ret.1 f.003_ 3.10 # TOOL 5 in/out1 *** 5/8-18 TAP_ 3.10 $$ TYPE 31 mat0=M2 tnr0 size.625_ 3.10 %DEADTAP tpi18 zstart.5 zdepth-.75_ 3.10