MAT'L od5.8 id0 zlim-8 zface.02 zclamp.1 type4=ALUMINUM_ 3.10  TOOL 1 in/out2 *** FACE AND ROUGH OD_ 3.10 $ TYPE 1 mat1=TIN tnr.032 size.375_ 3.10 FACE x5.9 z.03 xcut-.064 zcut0 depth0 f5_ 3.10  ROUGH xstk.02 zstk.002 depth.2 x5.8 z.05 safang270 f3_ 3.10 COMP ang90 lft/rt2 f5_ 3.10 RADIUS 1.75 type1 x0 z-1.75_ 3.10 RADIUS .5 type0 (xc1.276286 zc-.6751633)_ 3.10 LINE angle165_ 3.10 RADIUS .5 type2 x2.7 z-1.4 (xc1.7 zc-1.465826)_ 3.10 LINE angle180_ 3.10 RADIUS -.5 type2 x2.7 z-2.4 (xc3.7 zc-2.334174)_ 3.10 LINE angle165_ 3.10 RADIUS 1 type0 (xc1.6 zc-4.211075)_ 3.10 LINE angle180_ 3.10 POINT x3.6 z-5_ 3.10 RADIUS .5 type1 x3 z-5.4_ 3.10 LINE angle180_ 3.10 RADIUS -1 type0 (xc6 zc-5.710786)_ 3.10 LINE angle135_ 3.10 POINT x5.75 z-7_ 3.10 LINE angle180_ 3.10 POINT x5.75 z-8_ 3.10 UNCOMP angle180_ 3.10  unROUGH _ 3.10  TOOL 2 in/out2 *** FINISH OD_ 3.10 $ TYPE 2 mat1=TIN tnr.015 size.375_ 3.10 REPEAT from6 thru24_ 3.10