MAT'L od4 id0 zlim-3.6 zface.07 zclamp.5 type2=316_ 3.10 TOOL 1 in/out2 *** FACE AND TURN OD_ 3.10 $ TYPE 1 mat0=ALUM/OXY tnr.032 size.375_ 3.10 FACE x4.1 z.1 xcut-.064 zcut0 depth.05 f7_ 3.10 ROUGH xstk.01 zstk.002 depth.1 x4.02 z.05 safang270 f2_ 3.10 COMP ang90 lft/rt2 f5_ 3.10 POINT x1.65 z0_ 3.10 LINE angle180_ 3.10 POINT x1.65 z-.37_ 3.10 LINE angle90_ 3.10 POINT x3 z-.37_ 3.10 LINE angle180_ 3.10 POINT x3 z-1.5_ 3.10 LINE angle90_ 3.10 POINT x4 z-1.5_ 3.10 UNCOMP angle180_ 3.10 unROUGH _ 3.10 REPEAT from6 thru16_ 3.10 TOOL 2 in/out1 *** DRILL_ 3.10 $ TYPE 29 mat0=M2 tnr0 size.75_ 3.10 DRILL g74 rap.05 cut-2.5 peck-4 tip1 ret.1 f.0085_ 3.10 TOOL 3 in/out2 *** OD GROOVE_ 3.10 $ TYPE 9 mat1=C-5 tnr0 size.125_ 3.10 GROOVE x3z-.75dp.25w.45skip0r.005ir0a0 f4_ 3.10 TOOL 4 in/out2 *** THREAD OD_ 3.10 $ TYPE 15 mat2=CQ-2 tnr0 size20_ 3.10 THREAD maj3tpi20min2.938655 S255z-.25zfin-.8num8a60_ 3.10